Useful Tips On Asbestos Artex RemovalAsbestos was extensively used in the past for insulation and fireproofing purposes, as it is a fiber that is strongly fire resistant. The problem in using it lies in the fact, that it has minute, buoyant fibers that can be inhaled easily, or also be swallowed by human beings. These particles have been proved to be damaging, and are known to cause a series of severe diseases like cancer and asbestosis. Asbestosis is a disease which makes it extremely difficult for the sufferer to breathe. This is known as a chronic lung disease ). Due to the health hazards associated with asbestos, people got worried while performing asbestos artex removal. Here are some helpful tips:
1. Materials that are of an older texturing and artex (that was used before 1985), may be composed of asbestos. It is highly inadvisable to scrape or sand down the material without the professional advice of an asbestos specialist. It is better to get the area re-plastered and leave it untouched. A dust mask should be worn, at all times, during the procedure is taking place. A local authority or council should be contacted for FAQ's. 2. Asbestos is present in vinyl floors, therefore they should be tackled with complete care at the time of removal. Make sure to find out whether or not the material is in its friable state. If a material cannot be compressed into dust by the pressure of hand, it is considered to be in a non-friable state. If by chance, the non friable tiles made of asbestos are smashed or damaged , they can acquire a friable state. This would immediately result in the harmful fibers being freed into the atmosphere. Therefore, it is highly essential to take every possible precaution be taken while asbestos artex removal is taking place. 3. It is not at all easy to remove asbestos artex tiles. The person handling this procedure must make sure to wear the protective coveralls, and gears like safety glasses and respirator. These gears are specifically important as during the removal of asbestos, the person may suffer from poor vision or hard breathing. The elimination of vinyl tiles has to be done in pieces that are whole to avoid the material from acquiring a non friable state. This simply means that it is extremely dangerous to saw, drill or grind the vinyl tiles in order to remove them. It is very difficult for a layman to remove the asbestos artex tiles by himself. This is the reason why removal of vinyl tiles is not recommendatory. Penalties are imposed on those who try to practice the asbestos artex removal without the help of a certified contractor. |